View G150XG01V3_1576471.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

g150xg01 v3 rev 1.0 1/27 g150xg01 v3 ( v ) preliminary specifications ( ) final specifications module 15 inch color tft-lcd model name g150xg01 v3 customer date checked & approved by note: this specification is subject to change without notice. approved by date vito huang 2010/06/03 prepared by kuokang tseng 2010/06/03 audio-video business unit / au optronics corporation www..net
g150xg01 v3 rev 1.0 2/27 g150xg01 v3 contents 1. operating precautions ........................... ................................................... ....... 4 2. general description ............................. ................................................... ......... 5 2.1 display characteristics ........................ ................................................... ........................... 5 2.2 optical characteristics ........................ ................................................... ............................ 6 3. functional block diagram ........................ ................................................... .... 9 4. absolute maximum ratings........................ ................................................... 10 4.1 absolute ratings of tft lcd module............. ................................................... .............. 10 4.2 absolute ratings of environment................ ................................................... .................. 10 5. electrical characteristics...................... ................................................... ...... 11 5.1 tft lcd module ................................. ................................................... ......................... 11 5.2 backlight unit ................................. ................................................... ............................... 13 6. signal characteristic........................... ................................................... ........ 14 6.1 pixel format image............................. ................................................... .......................... 14 6.2 scanning direction............................. ................................................... ........................... 14 6.3 signal description ............................. ................................................... ............................ 15 6.4 the input data format.......................... ................................................... ........................ 16 6.5 interface timing ............................... ................................................... ............................. 18 6.6 power on/off sequence .......................... ................................................... .................. 19 7. connector & pin assignment ...................... .................................................. 2 0 7.1 tft lcd module: lvds connector................. ................................................... ............. 20 7.2 backlight unit: led connector .................. ................................................... ................... 21 7.2 backlight unit: led connector .................. ................................................... ................... 22 7.3 led connector pin assignment................... ................................................... ................. 22 8. reliability test criteria....................... ................................................... ......... 23 9. mechanical characteristics ...................... ................................................... .. 24 9.1 lcm outline dimension (front view)............. ................................................... ............... 24 9.2 lcm outline dimension (rear view) .............. ................................................... .............. 25 10. label and packaging............................ ................................................... ..... 26 10.1 shipping label (on the rear side of tft-lcd di splay) ............................................. ...... 26 10.2 carton package ................................ ................................................... .......................... 26 11 safety.......................................... ................................................... ................. 27 11.1 sharp edge requirements ....................... ................................................... ................... 27 11.2 materials..................................... ................................................... ................................. 27 11.3 capacitors .................................... ................................................... ............................... 27 11.4 national test lab requirement ................. ................................................... .................. 27 www..net
g150xg01 v3 rev 1.0 3/27 g150xg01 v3 record of revision version and date page old description new description www..net
g150xg01 v3 rev 1.0 4/27 g150xg01 v3 1. operating precautions 1) since front polarizer is easily damaged, please be cautious and not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long contact wi th water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with a bsorbent cotton or soft cloth. 5) since the panel is made of glass, it may be brok en or cracked if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open nor modify the module assembly. 8) do not press the reflector sheet at the back of the module to any direction. 9) in case if a module has to be put back into the packing container slot after it was taken out from the container, do not press the center of the led reflector edge. instead, press at the far ends of the led reflector edge sof tly. otherwise the tft module may be damaged. 10) at the insertion or removal of the signal inte rface connector, be sure not to rotate nor tilt the interface connector of the tft module. 11) tft-lcd module is not allowed to be twisted & b ent even force is added on module in a very short time. please design your display product well to avoid external force applying to module by end-user directly. 12) small amount of materials without flammability grade are used in the tft-lcd module. the tft-lcd module should be supplied by power complied with requirements of limited power source (iec60950 or ul1950), or be applied exemptio n. 13) severe temperature condition may result in diff erent luminance, response time. 14) continuous operating tft-lcd module under high temperature environment may accelerate led light bar exhaustion and reduce luminance drama tically. 15) the data on this specification sheet is applica ble when tft-lcd module is placed in landscape position. 16) continuous displaying fixed pattern may induce image sticking. it?s recommended to use screen saver or moving content periodically if fixe d pattern is displayed on the screen. www..net
g150xg01 v3 rev 1.0 5/27 g150xg01 v3 2. general description g150xg01 v3 is a color active matrix liquid crystal display composed of a tft-lcd display, a driver circuit, and a backlight system. the screen format is intended to support xga (1024(h) x 768(v)) screen and 16.2m (rgb 8-bits) or 262k color s (rgb 6-bits). all input signals are lvds interface compatible. all design rules of this modu le can correspond to pswg standard. g150xg01 v3 is designed for industrial display appl ications. 2.1 display characteristics the following items are characteristics summary on the table under 25 condition: items unit specifications screen diagonal [inch] 15 active area [mm] 304.128(h) x 228.096(v) pixels h x v 1024x2, 768 x2 (rgbw) pixel pitch [mm] 0.297 x 0.297 pixel arrangement r.g.b.w. rectangle display mode tn, normally white nominal input voltage vdd [volt] 3.3 typ. typical power consumption [watt] tbd weight [grams] 1000g (max.) physical size [mm] 326.5(h)x 253.5(v) x 13.1(d) (max.) electrical interface 1 channel lvds surface treatment anti-glare, hardness 3h support color 16.2m / 262k colors temperature range operating storage (non-operating) [ o c] [ o c] -30 to +85 - 3 0 to +85 rohs compliance rohs compliance www..net
g150xg01 v3 rev 1.0 6/27 g150xg01 v3 2.2 optical characteristics the optical characteristics are measured under stab le conditions at 25 (room temperature): item unit conditions min. typ. max. note white luminance [cd/m2] i f = 80ma (center point) 320 400 - 1 uniformity % 9 points 75 80 - 1, 2, 3 contrast ratio 400 700 - 4 cross talk % [msec] rising - 5.7 [msec] falling - 2.3 response time [msec] raising + falling - 8 6 [degree] [degree] horizontal (right) cr = 10 (left) 70 70 80 80 - - viewing angle [degree] [degree] vertical (upper) cr = 10 (lower) 50 70 60 80 - - 7 red x tbd red y tbd green x tbd green y tbd blue x tbd blue y tbd white x tbd color / chromaticity coordinates (cie 1931) white y tbd color gamut % 60 - note 1: measurement method equipment pattern generator, power supply, digital voltmeter, luminance meter (sr_3 or equivalent) aperture 1 with 50cm viewing distance test point center environment < 1 lux lcd module sr_3 or equivalent measuring distance module driving equipment www..net
g150xg01 v3 rev 1.0 7/27 g150xg01 v3 note 2: definition of 9 points position (display ac tive area : 304.128(h) x 228.096(v)) note 3: the luminance uniformity of 9 points is def ined by dividing the minimum luminance values by th e maximum test point luminance note 4 definition of contrast ratio (cr): note 5 definition of cross talk (ct) ct = | yb ? ya | / ya 100 (%) where ya = luminance of measured location without gray le vel 0 pattern (cd/m2) yb = luminance of measured location with gray level 0 pattern (cd/m2) min imum brightnes s of nine poin ts w9 = m aximum brightness of nine points contrast ratio (cr)= brightness on the ?white? state brightness on the ?bl ack? state 50 % 90 % 90 % 50 % 10 % 10 % 1/2 1/2 1/6 1/6 a b 1/2 1/2 1/6 1/6 2/3 1/3 1/3 2/3 a? b? 184 gray level www..net
g150xg01 v3 rev 1.0 8/27 g150xg01 v3 note 6: definition of response time: the output signals of photo detector are measured w hen the input signals are changed from ?white? to ? black? (falling time) and from ?black? to ?white? (rising time), respectively. the response time interval is between 10% and 90% of amplitudes. please refer to the figure as be low. note 7: definition of viewing angle viewing angle is the measurement of contrast ratio 10, at the screen center, over a 180 horizontal an d 180 R vertical range (off-normal viewing angles). the 180 viewing angle range is broken down as below: 90 ( ) horizontal left and right, and 90 ( ) vertical high (up) and low (down). the measuremen t direction is typically perpendicular to the display surface with the scree n rotated to its center to develop the desired measurement viewing angle. 100 90 10 0 % optical response white black white tf tr 90 10 0 optical response white black white tr www..net
g150xg01 v3 rev 1.0 9/27 g150xg01 v3 3. functional block diagram the following diagram shows the functional block of the 15 inch color tft/lcd module: led b/l lvds connector lvds receiver timing controller led driver au asic rsds lvds + 3.3v tft-lcd 1024(2)*768(2) pixels y - driver ic g1 d1 gate driver ic source driver ic dc/dc converter gamma correction led connector + 12v www..net
g150xg01 v3 rev 1.0 10/27 g150xg01 v3 4. absolute maximum ratings 4.1 absolute ratings of tft lcd module item symbol min max unit logic/lcd drive voltage vin - 0.3 + 3 . 6 [volt] 4.2 absolute ratings of environment item symbol min max unit operating temperature top -30 +85 [ o c] operation humidity hop 8 90 [%rh] storage temperature tst -30 +85 [ o c] storage humidity hst 8 90 [%rh] note: maximum wet-bulb should be 39 and no condensa tion. www..net
g150xg01 v3 rev 1.0 11/27 g150xg01 v3 5. electrical characteristics 5.1 tft lcd module 5.1.1 power specification symbol parameter min typ max units remark vdd logic/lcd drive voltage 3.0 3.3 3.6 [volt] 10% idd vdd current tbd tbd tbd [ma] 64 gray bar pattern (vdd=3.3v, at 60hz) i rush lcd inrush current - - 3 [a] note 1 pdd vdd power - tbd tbd [watt] 64 gray bar pattern (vdd=3.3v, at 60hz) note 1: measurement condition: q3 ao6402 g d2 s d1 d5 d6 q3 ao6402 g d2 s d1 d5 d6 c1 1uf/16v c2 1uf/25v c3 0.01uf/25v f1 vr1 47k +12.0v vcc sw1 sw mag-spst 1 2 (high to low) control signal (lcd module input) r2 1k +3.3v r1 47k r2 1k 90% 10% vdd rising time 0v 3.3v 470 us vdd 64 gray pattern www..net
g150xg01 v3 rev 1.0 12/27 g150xg01 v3 5.1.2 signal electrical characteristics input signals shall be low or hi-z state when vdd i s off. note: lvds signal waveform. symbol item min. typ. max. unit remark vth differential input high threshold - - 100 [mv] vcm=1.2v vtl differential input low threshold 100 - - [mv] vcm=1.2v vid input differential voltage 100 400 600 [mv] vicm differential input common mode voltage 1.15 1.2 1.45 [v] vth/vtl= 100mv www..net
g150xg01 v3 rev 1.0 13/27 g150xg01 v3 5.2 backlight unit 5.2.1 parameter guideline for led following characteristics are measured under stable condition using a led driving board at 25 (ro om temperature). symbol parameter min typ max unit remark vcc input voltage 10.8 12 12.6 volt ivcc input curent tbd a 100% pwm duty p led power consumption tbd watt 100% pwm duty irush inrush current tbd a f pwm pwm dimming frequency 200 20k hz swing voltage 4.5 5 5.5 dimming duty cycle 5 100 % vanalog analog dimming voltage 2.0 5 5.5 5v, 100% brightness i f led forward current - 80 84 ma ta = 25 o c - tbd tbd volt i f = 80ma, ta = -30 o c - tbd tbd volt i f = 80ma, ta = 25 o c v f led forward voltage - tbd tbd volt i f = 80ma, ta = 85 o c p led led power - tbd tbd watt operating life 50000 hrs i f = 80ma, ta = 25 o c note 1: ta means ambient temperature of tft-lcd mod ule. note 2: if g150xg01 v3 module is driven at high amb ient temperature & humidity condition. the operatin g life will be reduced. note 3: operating life means brightness goes down t o 50% initial brightness. typical operating life ti me is estimated data. www..net
g150xg01 v3 rev 1.0 14/27 g150xg01 v3 6. signal characteristic 6.1 pixel format image following figure shows the relationship between inp ut signal and lcd pixel format. 6.2 scanning direction the following figures show the image seen from the front view. the arrow indicates the direction of sc an. fig. 1 normal scan (pin4, rev = low or nc) fig. 2 reverse scan (pin4, rev = high) auo auo www..net
g150xg01 v3 rev 1.0 15/27 g150xg01 v3 6.3 signal description the module using a pair of lvds receiver sn75lvds82 (texas instruments) or compatible. lvds is a differential signal technology for lcd interface an d high speed data transfer device. transmitter shal l be sn75lvds83(negative edge sampling) or compatible . the first lvds port(rxoxxx) transmits odd pixels wh ile the second lvds port(rxexxx) transmits even pixels. input signal interface pin no. symbol description 1 vdd power supply, 3.3v (typical) 2 vdd power supply, 3.3v (typical) 3 gnd ground 4 rev reverse scan selection *note1 5 rin0- - lvds differential data input (r0-r5, g0) 6 rin0+ + lvds differential data input (r0-r5, g0) 7 gnd ground 8 rin1- - lvds differential data input (g1-g5, b0-b1) 9 rin1+ + lvds differential data input (g1-g5, b0-b1) 10 gnd ground 11 rin2- - lvds differential data input (b2-b5, de) 12 rin2+ + lvds differential data input (b2-b5, de) 13 gnd ground 14 clkin- - lvds differential clock input 15 clkin+ + lvds differential clock input 16 gnd ground 17 rin3- - lvds differential data input (r6-r7, g6-g7,b6-b7) *note2 18 rin3+ - lvds differential data input (r6-r7, g6-g7,b6-b7) *note2 19 nc nc 20 sel68 selection for 6 bits/8bits lvds data input *note1 note 1: input signals shall be in low status when v dd is off. note 2: if only the 6 bits mode is needed, pin 17 a nd pin 18 must be floated. (in this situation, 8 bi ts mode will be disable permanently. ) note 3: high stands for ?3.3v?, low stands for ?0v? , nc stands for ?no connection?. www..net
g150xg01 v3 rev 1.0 16/27 g150xg01 v3 6.4 the input data format 6.4.1 sel68 sel68 = ?high? or ?nc? for 6 bits lvds input sel68 = ?low? for 8 bits lvds input note1 : please follow pswg. note2 : r/g/b data 7:msb, r/g/b data 0:lsb signal name description remark r7 r6 r5 r4 r3 r2 r1 r0 red data 7 red data 6 red data 5 red data 4 red data 3 red data 2 red data 1 red data 0 red-pixel data for 8bits lvds input msb: r7 ; lsb: r0 for 6bits lvds input msb: r5 ; lsb: r0 g7 g6 g5 g4 g3 g2 g1 g0 green data 7 green data 6 green data 5 green data 4 green data 3 green data 2 green data 1 green data 0 green-pixel data for 8bits lvds input msb: g7 ; lsb: g0 for 6bits lvds input msb: g5 ; lsb: g0 www..net
g150xg01 v3 rev 1.0 17/27 g150xg01 v3 b7 b6 b5 b4 b3 b2 b1 b0 blue data 7 blue data 6 blue data 5 blue data 4 blue data 3 blue data 2 blue data 1 blue data 0 blue-pixel data for 8bits lvds input msb: b7 ; lsb: b0 for 6bits lvds input msb: b5 ; lsb: b0 rxclkin lvds data clock the typi cal frequency is 65mhz. the signal is used to strobe the pixel data and de signals. all pixel data shall be valid at the falling edge when the de signal is high. de data enable signal when the signal is high, the pixel data shall be valid to be displayed. note: output signals from any system shall be low o r hi-z state when vdd is off. www..net
g150xg01 v3 rev 1.0 18/27 g150xg01 v3 6.5 interface timing 6.5.1 timing characteristics signal parameter symbol min. typ. max. unit clock timing clock frequency 1/ t clock 50 65 80 mhz period t v 776 806 1023 active t vd - 768 - vsync timing vertical section blanking t vb 8 38 255 t line period t h 1054 1344 2047 active t hd - 1024 - hsync timing horizontal section blanking t hb 40 320 1023 t clock note: de mode only. note : typical value refer to vesa standard 6.5.2 input timing diagram www..net
g150xg01 v3 rev 1.0 19/27 g150xg01 v3 6.6 power on/off sequence vdd power and led on/off sequence is as below. inte rface signals are also shown in the chart. signals from any system shall be hi-z state or low level when vdd is off. power on/off sequence timing value parameter min. typ. max. units t1 0.5 - 10 [ms] t2 30 40 50 [ms] t3 200 - - [ms] t4 10 - - [ms] t5 10 - - [ms] t6 0 - - [ms] t7 10 - - [ms] t8 100 - - [ms] t9 0 16 50 [ms] t10 - - 10 [ms] t11 1000 - - [ms] the above on/off sequence should be applied to avoi d abnormal function in the display. please make sur e to turn off the power when you plug the cable into the input co nnector or pull the cable out of the connector. www..net
g150xg01 v3 rev 1.0 20/27 g150xg01 v3 7. connector & pin assignment physical interface is described as for the connecto r on module. these connectors are capable of accomm odating the following signals and will be following compone nts. 7.1 tft lcd module: lvds connector connector name / designation signal connector manufacturer stm or compatible connector model number msb240420-e mating housing part number p240420 or compatible pin# signal name pin# signal name 1 vdd 2 vdd 3 gnd 4 rev 5 rin0- 6 rin0+ 7 gnd 8 rin1- 9 rin1+ 10 gnd 11 rin2- 12 rin2+ 13 gnd 14 clkin- 15 clkin+ 16 gnd 17 rin3- 18 rin3+ 19 nc 20 sel68 www..net
g150xg01 v3 rev 1.0 21/27 g150xg01 v3 7.1.1 connector illustration sel68 www..net
g150xg01 v3 rev 1.0 22/27 g150xg01 v3 7.2 backlight unit: led connector connector name / designation led connector manufacturer e&t or compatible connector model number 3808k-f05n-02r or compatible mating connector model number h208k-p05n-02b or com patible 7.3 led connector pin assignment pin# symbol signal name 1 vcc 12v 2 gnd gnd 3 enable 5v-on / 0v-off 4 dimming pwm dimming or analog dimming 5 nc nc www..net
g150xg01 v3 rev 1.0 23/27 g150xg01 v3 8. reliability test criteria items required condition note temperature humidity bias 50 / 80%,300 hours high temperature operation 85 ,300 hours low temperature operation -30 ,300 hours hot storage 85 ,300 hours cold storage -30 ,300 hours thermal shock test -20 /30 min ,60 /30 min ,100cycles shock test (non-operating) 50g,20ms,half-sine wave,( x, y, z) vibration test (non-operating) 1.5g, (10~200hz, p-p) 30 mins/axis (x, y, z) on/off test on/10 sec, off/10 sec, 30,000 cycles esd contact discharge: 8kv, 150pf(330 ) 1sec, 8 points, 25 times/ point air discharge: 15kv, 150pf(330 ) 1sec, 8 points, 25 times/ point note 1 note1: according to en61000-4-2, esd class b: s ome performance degradation allowed. no data lost . self-recoverable. no hardware failures. www..net
g150xg01 v3 rev 1.0 24/27 g150xg01 v3 9. mechanical characteristics 9.1 lcm outline dimension (front view) www..net
g150xg01 v3 rev 1.0 25/27 g150xg01 v3 9.2 lcm outline dimension (rear view) www..net
g150xg01 v3 rev 1.0 26/27 g150xg01 v3 10. label and packaging 10.1 shipping label (on the rear side of tft-lcd display) 10.2 carton package max capacity: 15 tft-lcd module per carton (12pcs * 1 layers) max weight: 20 kg per carton outside dimension of carton: 375(l)mm* 430(w)mm* 35 3(h)mm www..net
g150xg01 v3 rev 1.0 27/27 g150xg01 v3 11 safety 11.1 sharp edge requirements there will be no sharp edges or comers on the displ ay assembly that could cause injury. 11.2 materials 11.2.1 toxicity there will be no carcinogenic materials used anywhe re in the display module. if toxic materials are used, they will be reviewed and approved by the res ponsible auo toxicologist. 11.2.2 flammability all components including electrical components that do not meet the flammability grade ul94-v1 in the module will complete the flammability rating except ion approval process. the printed circuit board will be made from materia l rated 94-v1 or better. the actual ul flammability rating will be printed on the printed circuit board . 11.3 capacitors if any polarized capacitors are used in the display assembly, provisions will be made to keep them fro m being inserted backwards. 11.4 national test lab requirement the display module will satisfy all requirements fo r compliance to: ul 1950, first edition u.s.a. information technology equipment www..net

▲Up To Search▲

Price & Availability of G150XG01V3

	To Download G150XG01V3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .